For the complete documentation index, see llms.txt. This page is also available as Markdown.
Glass Clip Installation
How to install clips for glass panel railing
Tools Needed From The Installation Kit
Things to Know For This Installation
Read over the provided material prior to the start of your installation.
This project requires a minimum of two people.
Please note, for best results store glass hardware at room temperature (68°F+ ) up to the point of install. Cold weather can cause the rubber material to shrink and lose flexibility and grip. This could cause the glass panel to slip and require retightening in the future. Installation during warmer weather is ideal.
When tightening the glass clips, be sure to tighten by hand, as power tools
can damage the screws.
How to Install Universal Standoff Pins
Locate and prepare your glass clips
Using the 3/16" Allen wrench, remove the two bolts from one side
If you do not have slots or holes in your glass, remove the middle pin
Slots are usually only needed for side mounted, post to post glass
Make sure the open face of the clip is facing the surface you will be mounting the glass from
Repeat these steps for the remaining posts on the run you will be working on
Using the 3/16" Allen Wrench, attach the larger glass clip half to the post
Using the provided suction cups, identify and move the relevant glass panel into place
Refer to your provided shop drawings to find the needed panel
Using the provided suction cups, identify and move the relevant glass panel into place
Refer to your provided shop drawings to find the needed panel
While one person holds the glass in place, begin reattaching the other glass clip half
Use the 3/16" Allen wrench to tighten each bolt snugly
Note: It is helpful to tighten each glass clip until snug, & then go back and retighten them until they are very tight. This will help keep the panel straight.
Repeat these steps for the rest of the run
Get Help from Us
Is this not the product you're looking for? Troubleshoot your issue by contacting our customer service team. 866-432-0541 or customerservice@viewrail.com
