3D Scan: Finishes Sheet

Customer Name: ____________________________ Project Order Number: _____________________________ Project Manager: ____________________________ Project Designer: __________________________________ Project Address ___________________________________________________________________________

The below information is needed to begin the design process of your system using Viewrail’s 3D Scan services. It is critical that Viewrail understands the finished floor and finished wall (including features such as wood accent walls, stone, etc.) thicknesses where they will interact with your system

Any changes from the agreed upon listed below, without Viewrail’s knowledge, may result in an additional scan or the replacement of already produced materials at the customer’s cost.

Critical Finish Details: Provide all measurements in fraction form to nearest 1/16”

---

FLIGHT: (Any Viewrail Stair System)

(Skip if not relevant.)

1. Lower Finish Floor Thickness (do not include sub floor thickness)_________________________________

   1. I would like my Footer mounted to the: FRAMING FINISH
2. Upper Finish Floor Thickness (do not include sub floor thickness)_________________________________

   1. I would like my Footer mounted to the: FRAMING FINISH
3. Finished Wall Thickness (indicate location; e.g. "back wall', "header", "left wall", etc.)

   1. Location:_______________________________ Thickness:______
   2. Location:_______________________________ Thickness:______
   3. Location:_______________________________ Thickness:______
   4. Location:_______________________________ Thickness:______

---

RAILING: (Decks, Existing Stairs, Kneewalls, Etc.)

(Skip if not relevant.) Include all environment details interacting with Viewrail product. Material thickness, finish details, etc.

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

MOUNT SURFACE:

FRAMING FINISH

FINISH THICKNESS:

_________________________

---

I, _______________________________________________, agree that the finish measurements listed above is how the structure will be built. I understand that any deviation from what was approved that results in Viewrail remaking my product will be at my own expense.

Property Owner Print Name ________________________________________________ Property Owner Signature __________________________________________________ Date ________________

Non-Property Owner Print Name ____________________________________________ Non-Property Owner Signature _____________________________________________ Date ________________ Relationship to Customer (i.e. builder, contractor, etc.) _______________________________________________